[dsn_klr650] beez needs help...

DSN_KLR650
Post Reply
Robert Morgan
Posts: 183
Joined: Fri Apr 07, 2000 1:38 pm

[dsn_klr650] beez needs help...

Post by Robert Morgan » Sun May 28, 2000 11:04 pm

Check the ignition switch and the circuitry to the shut off switch on the rt handle bar. Morgan
----- Original Message ----- From: Kurt Simpson To: DSN_klr650@egroups.com> Cc: Chris Beasley Sent: Sunday, May 28, 2000 8:00 PM Subject: [DSN_klr650] Fw: Beez needs help... > > ----- Original Message ----- > From: "Chris Beasley" > To: "Kurt Simpson" > Cc: DSN_klr650@egroups.com> > Sent: Sunday, May 28, 2000 7:51 PM > Subject: Re: Beez needs help... > > > > Update! > > I have another KLR, this one a late 91 model year. > > My CDI and coil work on his bike. > > So now I'm swapping parts onto mine from his and vice versa. > > > > No joy yet, tried the kill/starter switch. Will try the keyswitch and > > clutch switch next. Then the wiring loom? Or the exciter coil? > > I hate to do the exciter coil because I'd have to open the left sidecase. > > Not the best task to insert in the middle of an electrical debug. > > > > Any pearls from the list will be GREATLY appreciated and perhaps > > even compensated, if'n I make it to Moab. > > > > Thanks, cheers, Peace! > > Beez > > > > > > Kurt Simpson wrote: > > > > > Beez, our fashion guru is in trouble...he's not on the list so make sure > and > > > include him in your reply: > > > > > > My KLR is currently dead. > > > No spark. > > > Fuel and compression check out. > > > Coil resistances check out. > > > Sidestand & clutch switches both work. > > > "Exciter" pickup coil checks out. > > > > > > CDI? I'm not sure about the tests here, or if I believe the results. > > > All above tests performed with a DVM. > > > Coil not tested with high voltage spark test rig. (yet) > > > > > > I got another CDI but mine's an 88 and only has two connectors. > > > The CDI that I borrowed, is a 92 I think, and has a third connector, > > > a bullet type that I think goes to a fuse holder next to the rad catch > tank. > > > Is this CDI compatible w mine? Should I suspect my CDI and this one is > > > incompat? > > > > > > Help help please! I wanna leave for MOAB on Thursday!!!!! > > > TIA! > > > Beez > > > > > > > ------------------------------------------------------------------------ > Missing old school friends? Find them here: > http://click.egroups.com/1/4055/5/_/911801/_/959569329/ > ------------------------------------------------------------------------ > > Visit the KLR650 archives at > http://www.listquest.com/lq/search.html?ln=klr650 > Support Dual Sport News... dsneditor@... > Let's keep this list SPAM free! > > Visit our site at http://www.egroups.com/group/DSN_klr650 > To unsubscribe from this group, send an email to: > DSN_klr650-unsubscribe@egroups.com > >

Post Reply

Who is online

Users browsing this forum: No registered users and 20 guests