Adam Stahnke wrote:
[...]
> I decided to remove the plug and found an NGK DP9EA-9. This plug is not
> the right plug for the KLR according to the manual. What would having
> run this plug done?
No damage. It is one step colder than the spec plug.
> It was gapped at .95 mm, had a slight tan color,
> and had a few crusties on it. Thanks for the help.
Plug gap is a fraction wide but the plug colour seems ok.
If the colour was a bit on the dark side I would have suggested
going to spec plug.
Mister_T