Re: Export

[Ken Gillett]

As always, thanks Thorsten. Will check it out and let you know.

> On 15 Nov 2014, at 20:16, lemke@lemkesoft.de [cadintoshmac] wrote:
>
> Dear Ken,
>
>
> please download the new build 202.
> That does fix it.
>
> Beta releases
>
> Beta releases
> The beta versions are normally not signed with a developer certificate. So, you will have to disable Gatekeeper to execute the software.
> View on www.lemkesoft.org
> Preview by Yahoo
>
>
> This does also fix the possible crash in the input line reported by Rowland.
>
> Thorsten

Ken G i l l e t t

_/_/_/_/_/_/_/_/

[Ken Gillett]

Just checked it out and it does indeed fix the problem. Thanks Thorsten.

> please download the new build 202.
> That does fix it.
>
> Thorsten
>
>> On 7 Nov 2014, at 18:27, Ken Gillett kengroups@ukgb.net [cadintoshmac] wrote:
>>
>> I have drawn a line at 90° and 60mm long, starting at 0,0. So a short vertical line upwards from the origin. I then drew a line at 7.2° from that line, also from 0,0 which works correctly. I then tried the exact same process from the second line and the third line gets drawn 187.2° from the second line. I only get the correct angle when calculated from that first vertical line. If I try and draw at an angle from any of the new lines, it adds 180°.
>>
>> Since it works the first time, I can’t see I’m doing anything wrong. Is this perhaps a bug?
>

Ken G i l l e t t

_/_/_/_/_/_/_/_/