Re: Cadintosh issue

Roy Lewis · Post by **Roy Lewis** » Fri Mar 02, 2012 10:20 pm

Recently, after years of faithful service, and no changes in hardware or software on my system, two basic features of Cadintosh have stopped working. Shift-drag to pan and Option-drag to zoom simply stopped working mid-session. Closing and re-opening the document, failed to remedy the problem, as did relaunching Cadintosh. Restarting my system worked for about ten minutes, then the problem recurred. Then I was away from my computer for an hour, and things were working normally. I'm runninh Cadintosh 7.0.2 on a 27" iMac with OsX 10.6.8.
Roy

thorstenlemke · Post by **thorstenlemke** » Sat Mar 03, 2012 8:29 am

Hi Roy,

Many thanks for your report.

Is there any error message in the console?

Thorsten

> Von: Roy Lewis
> Antworten an:
> Datum: Fri, 02 Mar 2012 16:19:51 -0500
> An:
> Betreff: [cadintoshmac] Cadintosh issue
>
> Recently, after years of faithful service, and no changes in hardware or
> software on my system, two basic features of Cadintosh have stopped working.
> Shift-drag to pan and Option-drag to zoom simply stopped working mid-session.
> Closing and re-opening the document, failed to remedy the problem, as did
> relaunching Cadintosh. Restarting my system worked for about ten minutes, then
> the problem recurred. Then I was away from my computer for an hour, and things
> were working normally. I'm runninh Cadintosh 7.0.2 on a 27" iMac with OsX
> 10.6.8.
> Roy

Roy Lewis · Post by **Roy Lewis** » Sat Mar 03, 2012 4:35 pm

Hi Thorsten,Thanks for responding. No, there is no message in the Console. At the moment, things are working properly. This sounded like it could be either a Cadintosh issue or a Snow Leopard issue, I just can't tell.Roy

On Mar 3, 2012, at 2:29 AM, Thorsten Lemke wrote:
Hi Roy,

Many thanks for your report.

Is there any error message in the console?

Thorsten

> Von: Roy Lewis
> Antworten an:
> Datum: Fri, 02 Mar 2012 16:19:51 -0500
> An:
> Betreff: [cadintoshmac] Cadintosh issue
>
> Recently, after years of faithful service, and no changes in hardware or
> software on my system, two basic features of Cadintosh have stopped working.
> Shift-drag to pan and Option-drag to zoom simply stopped working mid-session.
> Closing and re-opening the document, failed to remedy the problem, as did
> relaunching Cadintosh. Restarting my system worked for about ten minutes, then
> the problem recurred. Then I was away from my computer for an hour, and things
> were working normally. I'm runninh Cadintosh 7.0.2 on a 27" iMac with OsX
> 10.6.8.
> Roy

Wilsons Sandbox