I have partly created a drawing but now I am unable to select any element of the drawing. All I get is the non ticking watch if I click on any element. I have tried "make all elements selectable" with no result.
I met this problem once before and somehow it was resolved but I cannot remember how.
I am using ver 6.1.1 on an Imac 2.8 Ghz
Any help would be very welcome - or do I just frustratingly start again?
PT
Re: unable to select any element.
-
thorstenlemke
- Posts: 127
- Joined: Sun Oct 13, 2013 7:45 pm
Re: unable to select any element.
Hi,
Can I get the drawing?
Thorsten
Can I get the drawing?
Thorsten
> Von: Peter
> Antworten an:
> Datum: Mon, 23 Aug 2010 13:35:42 -0000
> An:
> Betreff: [cadintoshmac] unable to select any element.
>
> I have partly created a drawing but now I am unable to select any element of
> the drawing. All I get is the non ticking watch if I click on any element. I
> have tried "make all elements selectable" with no result.
> I met this problem once before and somehow it was resolved but I cannot
> remember how.
> I am using ver 6.1.1 on an Imac 2.8 Ghz
> Any help would be very welcome - or do I just frustratingly start again?
> PT
>
-
Peter
- Posts: 11
- Joined: Mon Aug 23, 2010 2:41 pm
Re: unable to select any element.
Yes of course how can I send it to you?
PT
PT
--- In cadintoshmac@yahoogroups.com, Thorsten Lemke wrote:
>
> Hi,
>
> Can I get the drawing?
>
> Thorsten
>
>
> > Von: Peter
> > Antworten an:
> > Datum: Mon, 23 Aug 2010 13:35:42 -0000
> > An:
> > Betreff: [cadintoshmac] unable to select any element.
> >
> > I have partly created a drawing but now I am unable to select any element of
> > the drawing. All I get is the non ticking watch if I click on any element. I
> > have tried "make all elements selectable" with no result.
> > I met this problem once before and somehow it was resolved but I cannot
> > remember how.
> > I am using ver 6.1.1 on an Imac 2.8 Ghz
> > Any help would be very welcome - or do I just frustratingly start again?
> > PT
> >
>
-
thorstenlemke
- Posts: 127
- Joined: Sun Oct 13, 2013 7:45 pm
Re: unable to select any element.
Hello,
Simply zip and e-mail to lemke@lemkesoft.de
Thorsten
Simply zip and e-mail to lemke@lemkesoft.de
Thorsten
> Von: Peter
> Antworten an:
> Datum: Mon, 23 Aug 2010 14:27:06 -0000
> An:
> Betreff: [cadintoshmac] Re: unable to select any element.
>
> Yes of course how can I send it to you?
> PT
> --- In cadintoshmac@yahoogroups.com, Thorsten Lemke wrote:
>>
>> Hi,
>>
>> Can I get the drawing?
>>
>> Thorsten
>>
>>
>>> Von: Peter
>>> Antworten an:
>>> Datum: Mon, 23 Aug 2010 13:35:42 -0000
>>> An:
>>> Betreff: [cadintoshmac] unable to select any element.
>>>
>>> I have partly created a drawing but now I am unable to select any element of
>>> the drawing. All I get is the non ticking watch if I click on any element. I
>>> have tried "make all elements selectable" with no result.
>>> I met this problem once before and somehow it was resolved but I cannot
>>> remember how.
>>> I am using ver 6.1.1 on an Imac 2.8 Ghz
>>> Any help would be very welcome - or do I just frustratingly start again?
>>> PT
>>>
>>
>
>
-
Peter
- Posts: 11
- Joined: Mon Aug 23, 2010 2:41 pm
Re: unable to select any element.
Hello
I have now solved this problem.
If I select Edit>Utilities> Make all selectable.
It results in the exact opposite - all elements are NOT selectable.
By using the "selectable/Not selectable" button in tools each element can be made selectable again. But each element has to be selected individually.
After making elements selectable again any use of "Edit > Utilities > Make all selectable" deselects the item and all others.
Hope this helps anyone else meeting this "bug"?
Peter
I have now solved this problem.
If I select Edit>Utilities> Make all selectable.
It results in the exact opposite - all elements are NOT selectable.
By using the "selectable/Not selectable" button in tools each element can be made selectable again. But each element has to be selected individually.
After making elements selectable again any use of "Edit > Utilities > Make all selectable" deselects the item and all others.
Hope this helps anyone else meeting this "bug"?
Peter
--- In cadintoshmac@yahoogroups.com, Thorsten Lemke wrote:
>
> Hello,
>
> Simply zip and e-mail to lemke@...
>
> Thorsten
>
>
>
> > Von: Peter
> > Antworten an:
> > Datum: Mon, 23 Aug 2010 14:27:06 -0000
> > An:
> > Betreff: [cadintoshmac] Re: unable to select any element.
> >
> > Yes of course how can I send it to you?
> > PT
> > --- In cadintoshmac@yahoogroups.com, Thorsten Lemke wrote:
> >>
> >> Hi,
> >>
> >> Can I get the drawing?
> >>
> >> Thorsten
> >>
> >>
> >>> Von: Peter
> >>> Antworten an:
> >>> Datum: Mon, 23 Aug 2010 13:35:42 -0000
> >>> An:
> >>> Betreff: [cadintoshmac] unable to select any element.
> >>>
> >>> I have partly created a drawing but now I am unable to select any element of
> >>> the drawing. All I get is the non ticking watch if I click on any element. I
> >>> have tried "make all elements selectable" with no result.
> >>> I met this problem once before and somehow it was resolved but I cannot
> >>> remember how.
> >>> I am using ver 6.1.1 on an Imac 2.8 Ghz
> >>> Any help would be very welcome - or do I just frustratingly start again?
> >>> PT
> >>>
> >>
> >
> >
>
-
Gil
- Posts: 2
- Joined: Sat Sep 04, 2010 11:49 pm
Re: unable to select any element.
I can now duplicate this problem. i use the Edit>Utilities> Make all selectable and it actually makes all elements not selectable. The only way out is to quit CADintosh and restart it.
At the time that I duplicated Peter's bug, I was trying to change a circle from dashed line style to solid line style. I was also unable to do this. The only workaround I know is to delete the dashed circle (or a straight line) and draw it again with Solid selected.
Regards,
Gil
At the time that I duplicated Peter's bug, I was trying to change a circle from dashed line style to solid line style. I was also unable to do this. The only workaround I know is to delete the dashed circle (or a straight line) and draw it again with Solid selected.
Regards,
Gil
--- In cadintoshmac@yahoogroups.com, "Peter" wrote:
>
> Hello
> I have now solved this problem.
> If I select Edit>Utilities> Make all selectable.
>
> It results in the exact opposite - all elements are NOT selectable.
>
> By using the "selectable/Not selectable" button in tools each element can be made selectable again. But each element has to be selected individually.
>
> After making elements selectable again any use of "Edit > Utilities > Make all selectable" deselects the item and all others.
> Hope this helps anyone else meeting this "bug"?
>
> Peter
>
> --- In cadintoshmac@yahoogroups.com, Thorsten Lemke wrote:
> >
> > Hello,
> >
> > Simply zip and e-mail to lemke@
> >
> > Thorsten
> >
> >
> >
> > > Von: Peter
> > > Antworten an:
> > > Datum: Mon, 23 Aug 2010 14:27:06 -0000
> > > An:
> > > Betreff: [cadintoshmac] Re: unable to select any element.
> > >
> > > Yes of course how can I send it to you?
> > > PT
> > > --- In cadintoshmac@yahoogroups.com, Thorsten Lemke wrote:
> > >>
> > >> Hi,
> > >>
> > >> Can I get the drawing?
> > >>
> > >> Thorsten
> > >>
> > >>
> > >>> Von: Peter
> > >>> Antworten an:
> > >>> Datum: Mon, 23 Aug 2010 13:35:42 -0000
> > >>> An:
> > >>> Betreff: [cadintoshmac] unable to select any element.
> > >>>
> > >>> I have partly created a drawing but now I am unable to select any element of
> > >>> the drawing. All I get is the non ticking watch if I click on any element. I
> > >>> have tried "make all elements selectable" with no result.
> > >>> I met this problem once before and somehow it was resolved but I cannot
> > >>> remember how.
> > >>> I am using ver 6.1.1 on an Imac 2.8 Ghz
> > >>> Any help would be very welcome - or do I just frustratingly start again?
> > >>> PT
> > >>>
> > >>
> > >
> > >
> >
>
-
Gil
- Posts: 2
- Joined: Sat Sep 04, 2010 11:49 pm
Re: unable to select any element.
I can now duplicate this problem. i use the Edit>Utilities> Make all selectable and it actually makes all elements not selectable. The only way out is to quit CADintosh and restart it.
At the time that I duplicated Peter's bug, I was trying to change a circle from dashed line style to solid line style. I was also unable to do this. The only workaround I know is to delete the dashed circle (or a straight line) and draw it again with Solid selected.
Regards,
Gil
At the time that I duplicated Peter's bug, I was trying to change a circle from dashed line style to solid line style. I was also unable to do this. The only workaround I know is to delete the dashed circle (or a straight line) and draw it again with Solid selected.
Regards,
Gil
--- In cadintoshmac@yahoogroups.com, "Peter" wrote:
>
> Hello
> I have now solved this problem.
> If I select Edit>Utilities> Make all selectable.
>
> It results in the exact opposite - all elements are NOT selectable.
>
> By using the "selectable/Not selectable" button in tools each element can be made selectable again. But each element has to be selected individually.
>
> After making elements selectable again any use of "Edit > Utilities > Make all selectable" deselects the item and all others.
> Hope this helps anyone else meeting this "bug"?
>
> Peter
>
> --- In cadintoshmac@yahoogroups.com, Thorsten Lemke wrote:
> >
> > Hello,
> >
> > Simply zip and e-mail to lemke@
> >
> > Thorsten
> >
> >
> >
> > > Von: Peter
> > > Antworten an:
> > > Datum: Mon, 23 Aug 2010 14:27:06 -0000
> > > An:
> > > Betreff: [cadintoshmac] Re: unable to select any element.
> > >
> > > Yes of course how can I send it to you?
> > > PT
> > > --- In cadintoshmac@yahoogroups.com, Thorsten Lemke wrote:
> > >>
> > >> Hi,
> > >>
> > >> Can I get the drawing?
> > >>
> > >> Thorsten
> > >>
> > >>
> > >>> Von: Peter
> > >>> Antworten an:
> > >>> Datum: Mon, 23 Aug 2010 13:35:42 -0000
> > >>> An:
> > >>> Betreff: [cadintoshmac] unable to select any element.
> > >>>
> > >>> I have partly created a drawing but now I am unable to select any element of
> > >>> the drawing. All I get is the non ticking watch if I click on any element. I
> > >>> have tried "make all elements selectable" with no result.
> > >>> I met this problem once before and somehow it was resolved but I cannot
> > >>> remember how.
> > >>> I am using ver 6.1.1 on an Imac 2.8 Ghz
> > >>> Any help would be very welcome - or do I just frustratingly start again?
> > >>> PT
> > >>>
> > >>
> > >
> > >
> >
>
Who is online
Users browsing this forum: No registered users and 62 guests