Re: 6.0.1 Random crashes

scandiainn2000 · Post by **scandiainn2000** » Sun Feb 15, 2009 8:48 pm

I have a 320k size cadintosh file that contains my house structure, electrical and plumbing
that contains about 30 layers. The doc has gone through a number of app. versions as I
have worked on it for several years. THis past year I exported my floor plan into Sketchup
and have not used cadintosh much since. I was still running 6.0 today when I tried to do
some work on it. It would open and run until I would toggle layers off and on and it would
crash. Downloaded the 6.0.1 update but still having the same problem.

I am running OS 10.5.6 on a 2.8 Dual quad Mac Pro with 6 Gb of ram. Do I have a file that
has corrupted on me and if so is there any repair?
Anybody else experiencing this?

Thanks,
Bill

RowlandCarson · Post by **RowlandCarson** » Sun Feb 15, 2009 11:50 pm

At 2009-02-15 19:48 +0000 scandiainn2000 wrote:

>I have a 320k size cadintosh file

>It would open and run until I would toggle layers off and on and it would
>crash. Downloaded the 6.0.1 update but still having the same problem.
>
>I am running OS 10.5.6 on a 2.8 Dual quad Mac Pro with 6 Gb of ram.
>Do I have a file that
>has corrupted on me and if so is there any repair?
>Anybody else experiencing this

Bill - can't speak to your particular configuration but have not seen
anything like that on my setup (PPC G4 CPU, Mac OS 10.4.11) - and I
don't think any of my files are as big as yours.

If you'd care to send me a copy of your file (either direct to me or
by putting it up in the files section of this list) I'll see if I can
replicate your symptoms. I'm going to be away fom base a bit in the
next day or two so response may be delayed.

regards

Rowland
--
| Rowland Carson http://home.clara.net/rowil/
| ... that's Rowland with a 'w' ...

thorstenlemke · Post by **thorstenlemke** » Mon Feb 16, 2009 9:25 am

Attachments :Re: [cadintoshmac] 6.0.1 Random crashes Hello,

Can I get a copy of the file?

Thorsten

Von: Rowland Carson
Antworten an:
Datum: Sun, 15 Feb 2009 22:50:11 +0000
An:
Betreff: Re: [cadintoshmac] 6.0.1 Random crashes

At 2009-02-15 19:48 +0000 scandiainn2000 wrote:

>I have a 320k size cadintosh file

>It would open and run until I would toggle layers off and on and it would
>crash. Downloaded the 6.0.1 update but still having the same problem.
>
>I am running OS 10.5.6 on a 2.8 Dual quad Mac Pro with 6 Gb of ram.
>Do I have a file that
>has corrupted on me and if so is there any repair?
>Anybody else experiencing this

Bill - can't speak to your particular configuration but have not seen
anything like that on my setup (PPC G4 CPU, Mac OS 10.4.11) - and I
don't think any of my files are as big as yours.

If you'd care to send me a copy of your file (either direct to me or
by putting it up in the files section of this list) I'll see if I can
replicate your symptoms. I'm going to be away fom base a bit in the
next day or two so response may be delayed.

regards

Rowland
--

Jack C Binford · Post by **Jack C Binford** » Mon Feb 16, 2009 3:27 pm

Thorsten,
When this message opened, I got the following: "Unable to verify message signature.""The digital signature for this message is incorrect. The message may have been tampered with or corrupted since being signed by "lemke@lemkesoft.de."
Best regards,
Jack Binford

On Feb 16, 2009, at 3:24 AM, Thorsten Lemke wrote:

Hello,

Can I get a copy of the file?

Thorsten

Von: Rowland Carson
Antworten an:
Datum: Sun, 15 Feb 2009 22:50:11 +0000
An:
Betreff: Re: [cadintoshmac] 6.0.1 Random crashes

At 2009-02-15 19:48 +0000 scandiainn2000 wrote:

>I have a 320k size cadintosh file

>It would open and run until I would toggle layers off and on and it would
>crash. Downloaded the 6.0.1 update but still having the same problem.
>
>I am running OS 10.5.6 on a 2.8 Dual quad Mac Pro with 6 Gb of ram.
>Do I have a file that
>has corrupted on me and if so is there any repair?
>Anybody else experiencing this

Bill - can't speak to your particular configuration but have not seen
anything like that on my setup (PPC G4 CPU, Mac OS 10.4.11) - and I
don't think any of my files are as big as yours.

If you'd care to send me a copy of your file (either direct to me or
by putting it up in the files section of this list) I'll see if I can
replicate your symptoms. I'm going to be away fom base a bit in the
next day or two so response may be delayed.

regards

Rowland
--

Scandia Inn · Post by **Scandia Inn** » Fri Feb 20, 2009 8:07 pm

Attachments :Thanks, Rowland & Thorsten

I uploaded to the Files section. May be a clue is the upload shows on
134 KB when the Finer shows 320 KB. I'll try downloading this file
and let you know.

Bill

scandiainn2000 · Post by **scandiainn2000** » Fri Feb 20, 2009 8:19 pm

--- In cadintoshmac@yahoogroups.com, Scandia Inn wrote:

THink again. Could only get a text file to upload. Tried twice and got the same result.
I will now try to email a copy to both of you.

Bill

scandiainn2000 · Post by **scandiainn2000** » Sat Feb 21, 2009 6:25 am

--- In cadintoshmac@yahoogroups.com, "scandiainn2000" wrote:

>

Finally got it uploaded to the Files Section. Let me know if you have trouble downloading
or opening. Typically, it will shut down after I change a few layer displays. Really haven't
tried many other functions for similar a response or if it might be a function of time?

Thanks,
Bill

scandiainn2000 · Post by **scandiainn2000** » Thu Feb 26, 2009 7:51 pm

--- In cadintoshmac@yahoogroups.com, "scandiainn2000"
wrote:

>
> --- In cadintoshmac@yahoogroups.com, "scandiainn2000" scandiainn@

wrote:

> >
> Finally got it uploaded to the Files Section. Let me know if you have

trouble downloading

> or opening. Typically, it will shut down after I change a few layer

displays. Really haven't

> tried many other functions for similar a response or if it might be a

function of time?

>
> Thanks,
> Bill
>

Wilsons Sandbox