V2 Neon backplate
Posted: Mon Nov 16, 2015 9:36 pm
Attachments :
I have been working with Craig R for a few months on a backplate for
the V2 Torso and it's finally ready. The V2 backplate is a work of
art and it fits the V2 Torso like a glove. Craig might want to chime
in on this but he thinks this back plate has origins that go all the
way back to the hero backplate. He has worked months and months
correcting the flaws that were in the hero backplate to bring this
backplate up to his standards. I worked with him on the final design
and I produce them in my state of the art backplate manufacturing
facility(my kitchen). I just finished a run and they are ready for immediate shipping.
As an added bonus the V2 backplate is .100 thick, while my old
backplates were .080. that might not sound like much but believe me, it is!
The V2 backplate has been verified to fit the V2 Torso but it should
fit any torso.
I've attached some pictures of the new V2 backplate
It turns out there is a bit of a learning curve forming thicker
styrene. I have two backplates that had a small wrinkle in the
bottom where it attaches behind the large chest lights. I have
sanded the flaw out and once installed it can't be seen but I'll let
these go for $50 each + shipping a $15 dollar savings. Please e-mail
me privately if interested.
David H
- [url=file:///C:\Users\CyberPigStudio\AppData\Local\PG Offline 4\Attachments\B9Builders\backplate4.jpg]backplate4.jpg[/url]
- [url=file:///C:\Users\CyberPigStudio\AppData\Local\PG Offline 4\Attachments\B9Builders\backplate3.jpg]backplate3.jpg[/url]
- [url=file:///C:\Users\CyberPigStudio\AppData\Local\PG Offline 4\Attachments\B9Builders\backplate2.jpg]backplate2.jpg[/url]
- [url=file:///C:\Users\CyberPigStudio\AppData\Local\PG Offline 4\Attachments\B9Builders\backplate1.jpg]backplate1.jpg[/url]
I have been working with Craig R for a few months on a backplate for
the V2 Torso and it's finally ready. The V2 backplate is a work of
art and it fits the V2 Torso like a glove. Craig might want to chime
in on this but he thinks this back plate has origins that go all the
way back to the hero backplate. He has worked months and months
correcting the flaws that were in the hero backplate to bring this
backplate up to his standards. I worked with him on the final design
and I produce them in my state of the art backplate manufacturing
facility(my kitchen). I just finished a run and they are ready for immediate shipping.
As an added bonus the V2 backplate is .100 thick, while my old
backplates were .080. that might not sound like much but believe me, it is!
The V2 backplate has been verified to fit the V2 Torso but it should
fit any torso.
I've attached some pictures of the new V2 backplate
It turns out there is a bit of a learning curve forming thicker
styrene. I have two backplates that had a small wrinkle in the
bottom where it attaches behind the large chest lights. I have
sanded the flaw out and once installed it can't be seen but I'll let
these go for $50 each + shipping a $15 dollar savings. Please e-mail
me privately if interested.
David H
