Wilsons Sandbox

I'm checking to see if if we have any builders who might want any rubber part before the end of the year. I'm about to put the molds back into storage and don't want to do that until i chekc with the club first.
All the best,
Will

Hello Will!

Storage? for how long?

Mat...

---- "fxrtst@aol.com [B9Builders]" wrote:

> I'm checking to see if if we have any builders who might want any rubber part before the end of the year. I'm about to put the molds back into storage and don't want to do that until i chekc with the club first.
>
>
> All the best,
>
>
> Will

Not sure when the next run will be. Just need them out of my garage for space.

Sent from my iPhone

> On Nov 16, 2015, at 4:11 PM, matdeion@cox.net [B9Builders] wrote:
>
> Hello Will!
>
> Storage? for how long?
>
> Mat...
>
> ---- "fxrtst@aol.com [B9Builders]" wrote:
>> I'm checking to see if if we have any builders who might want any rubber part before the end of the year. I'm about to put the molds back into storage and don't want to do that until i chekc with the club first.
>>
>>
>> All the best,
>>
>>
>> Will
>
>
>
> ------------------------------------
> Posted by:
> ------------------------------------
>
> "Let's Build!"
>
>
> ------------------------------------
>
> Yahoo Groups Links
>
>
>

Just a note to the newer members:

If you plan on snagging any parts (other than off-the-shelf), get them sooner - when offered - rather than later. That applies to *all* part runs. All of the Club vendors offer first-class items, but they are offered on a "when possible" rather than "when needed" basis.

This was a lesson I learned through experience. It taught me patience - but I also missed out on some great stuff.

Hello Will!

Yes! - I can understand that! - we talked about 3 years back - I was going through a divorce - just starting to get my feet on the ground
I put my b9 in storage ( more like hiding! ) so the shark lawyers wouldn't expect me to sell it off for bills - would like to get back into building again
Just an order right know would be too soon! - Really liked the parts I saw that you made! - would love to get a set!
Just a request - would you mind contacting me again when you do get set up again? -

Thank you very much!

Mat B9-109

---- "Will Huff fxrtst@aol.com [B9Builders]" wrote:

> Not sure when the next run will be. Just need them out of my garage for space.
>
> Sent from my iPhone
>
> > On Nov 16, 2015, at 4:11 PM, matdeion@cox.net [B9Builders] wrote:
> >
> > Hello Will!
> >
> > Storage? for how long?
> >
> > Mat...
> >
> > ---- "fxrtst@aol.com [B9Builders]" wrote:
> >> I'm checking to see if if we have any builders who might want any rubber part before the end of the year. I'm about to put the molds back into storage and don't want to do that until i chekc with the club first.
> >>
> >>
> >> All the best,
> >>
> >>
> >> Will
> >
> >
> >
> > ------------------------------------
> > Posted by:
> > ------------------------------------
> >
> > "Let's Build!"
> >
> >
> > ------------------------------------
> >
> > Yahoo Groups Links
> >
> >
> >

Sure I'll let you know. I have alot of irons in the coals at the moment, so could be a long while. Build slowly

Will

Sent from my iPhone

> On Nov 16, 2015, at 6:29 PM, matdeion@cox.net [B9Builders] wrote:
>
> Hello Will!
>
> Yes! - I can understand that! - we talked about 3 years back - I was going through a divorce - just starting to get my feet on the ground
> I put my b9 in storage ( more like hiding! ) so the shark lawyers wouldn't expect me to sell it off for bills - would like to get back into building again
> Just an order right know would be too soon! - Really liked the parts I saw that you made! - would love to get a set!
> Just a request - would you mind contacting me again when you do get set up again? -
>
> Thank you very much!
>
> Mat B9-109
>
> ---- "Will Huff fxrtst@aol.com [B9Builders]" wrote:
>> Not sure when the next run will be. Just need them out of my garage for space.
>>
>> Sent from my iPhone
>>
>>> On Nov 16, 2015, at 4:11 PM, matdeion@cox.net [B9Builders] wrote:
>>>
>>> Hello Will!
>>>
>>> Storage? for how long?
>>>
>>> Mat...
>>>
>>> ---- "fxrtst@aol.com [B9Builders]" wrote:
>>>> I'm checking to see if if we have any builders who might want any rubber part before the end of the year. I'm about to put the molds back into storage and don't want to do that until i chekc with the club first.
>>>>
>>>>
>>>> All the best,
>>>>
>>>>
>>>> Will
>>>
>>>
>>>
>>> ------------------------------------
>>> Posted by:
>>> ------------------------------------
>>>
>>> "Let's Build!"
>>>
>>>
>>> ------------------------------------
>>>
>>> Yahoo Groups Links
>
>
>
> ------------------------------------
> Posted by:
> ------------------------------------
>
> "Let's Build!"
>
>
> ------------------------------------
>
> Yahoo Groups Links
>
>
>

Will I'm a new member and I would like to purchase the rubber. Still trying to figure out what I'm doing but if I get parts when offered I should be ok. Karl 

Sent from my iPhone

On Nov 16, 2015, at 3:16 PM, fxrtst@aol.com [B9Builders] wrote:

 
I'm checking to see if if we have any builders who might want any rubber part before the end of the year. I'm about to put the molds back into storage and don't want to do that until i chekc with the club first.
All the best,
Will

I'm a new member too. I'm interested in the rubber as well.
I haven't even got started yet!Kayla

Sent from my iPhone

On Nov 16, 2015, at 10:12 PM, Karl Wawarosky KMW659@aol.com [B9Builders] wrote:

 
Will I'm a new member and I would like to purchase the rubber. Still trying to figure out what I'm doing but if I get parts when offered I should be ok. Karl 

Sent from my iPhone
On Nov 16, 2015, at 3:16 PM, fxrtst@aol.com [B9Builders] wrote:

 
I'm checking to see if if we have any builders who might want any rubber part before the end of the year. I'm about to put the molds back into storage and don't want to do that until i chekc with the club first.
All the best,
Will

Ok instead of answering all the emails I leave you too it. 
Please visit my online store. Check out the parts and if you are still interested send me a private email. I'll add you to the list. Then I'll contact everybody on the list in a few days!
Link: https://b9-rubber-parts.myshopify.com
All the best ,
Will

Sent from my iPhone

On Nov 16, 2015, at 7:12 PM, Karl Wawarosky KMW659@aol.com [B9Builders] wrote:

Will I'm a new member and I would like to purchase the rubber. Still trying to figure out what I'm doing but if I get parts when offered I should be ok. Karl 

Sent from my iPhone
On Nov 16, 2015, at 3:16 PM, fxrtst@aol.com [B9Builders] wrote:

 
I'm checking to see if if we have any builders who might want any rubber part before the end of the year. I'm about to put the molds back into storage and don't want to do that until i chekc with the club first.
All the best,
Will

So far looks like we have enough interest to do a final run.


-----Original Message-----
From: Will Huff fxrtst@aol.com [B9Builders]
To: B9Builders
Sent: Mon, Nov 16, 2015 8:46 pm
Subject: Re: [B9Builders] Last Rubber run for 2015

#ygrps-yiv-1753918463 #ygrps-yiv-1753918463AOLMsgPart_2_70c14bfe-1c6d-4a8c-ae09-6fb068e29042 td{color:black;}#ygrps-yiv-1753918463 .ygrps-yiv-1753918463aolReplacedBody .ygrps-yiv-1753918463ygrp-photo-title{clear:both;font-size:smaller;height:15px;overflow:hidden;text-align:center;width:75px;}#ygrps-yiv-1753918463 .ygrps-yiv-1753918463aolReplacedBody div.ygrps-yiv-1753918463ygrp-photo{background-position:center;background-repeat:no-repeat;background-color:white;border:1px solid black;height:62px;width:62px;}#ygrps-yiv-1753918463 .ygrps-yiv-1753918463aolReplacedBody div.ygrps-yiv-1753918463photo-title a, #ygrps-yiv-1753918463 .ygrps-yiv-1753918463aolReplacedBody div.ygrps-yiv-1753918463photo-title a:active, #ygrps-yiv-1753918463 .ygrps-yiv-1753918463aolReplacedBody div.ygrps-yiv-1753918463photo-title a:hover, #ygrps-yiv-1753918463 .ygrps-yiv-1753918463aolReplacedBody div.ygrps-yiv-1753918463photo-title a:visited {text-decoration:none;}#ygrps-yiv-1753918463 .ygrps-yiv-1753918463aolReplacedBody div.ygrps-yiv-1753918463attach-table div.ygrps-yiv-1753918463attach-row {clear:both;}#ygrps-yiv-1753918463 .ygrps-yiv-1753918463aolReplacedBody div.ygrps-yiv-1753918463attach-table div.ygrps-yiv-1753918463attach-row div {float:left;}#ygrps-yiv-1753918463 .ygrps-yiv-1753918463aolReplacedBody p {clear:both;padding:15px 0 3px 0;overflow:hidden;}#ygrps-yiv-1753918463 .ygrps-yiv-1753918463aolReplacedBody div.ygrps-yiv-1753918463ygrp-file {width:30px;}#ygrps-yiv-1753918463 .ygrps-yiv-1753918463aolReplacedBody div.ygrps-yiv-1753918463attach-table div.ygrps-yiv-1753918463attach-row div div a {text-decoration:none;}#ygrps-yiv-1753918463 .ygrps-yiv-1753918463aolReplacedBody div.ygrps-yiv-1753918463attach-table div.ygrps-yiv-1753918463attach-row div div span {font-weight:normal;}#ygrps-yiv-1753918463 .ygrps-yiv-1753918463aolReplacedBody div.ygrps-yiv-1753918463ygrp-file-title {font-weight:bold;}

Ok instead of answering all the emails I leave you too it. 
Please visit my online store. Check out the parts and if you are still interested send me a private email. I'll add you to the list. Then I'll contact everybody on the list in a few days!
Link: https://b9-rubber-parts.myshopify.com
All the best ,
Will

Sent from my iPhone

On Nov 16, 2015, at 7:12 PM, Karl Wawarosky KMW659@aol.com [B9Builders] wrote:

Will I'm a new member and I would like to purchase the rubber. Still trying to figure out what I'm doing but if I get parts when offered I should be ok.  Karl 

Sent from my iPhone
On Nov 16, 2015, at 3:16 PM, fxrtst@aol.com [B9Builders] wrote:

  I'm checking to see if if we have any builders who might want any rubber part before the end of the year. I'm about to put the molds back into storage and don't want to do that until i chekc with the club first.
All the best,
Will