Craig's Brain kit offer
Posted: Sun Sep 27, 2015 4:40 pm
Well, I know that everyone has their own opinion.
But , as that I have built somewhere around 65 to 70 of these brain kits
- yes, it's the same that a certain company had that I worked at - I
used a very heavy duty soldering iron and solder ( what type it was - I
can't remember) to build them. They are steel - not copper lined or
covered. Interesting fact on these was that as soon as I had one done.
It had to be washed with acetone and then primed immediately so that it
would not rust.
Oh, the good old days - went to work and played with robot parts.
Later,
Greg
But , as that I have built somewhere around 65 to 70 of these brain kits
- yes, it's the same that a certain company had that I worked at - I
used a very heavy duty soldering iron and solder ( what type it was - I
can't remember) to build them. They are steel - not copper lined or
covered. Interesting fact on these was that as soon as I had one done.
It had to be washed with acetone and then primed immediately so that it
would not rust.
Oh, the good old days - went to work and played with robot parts.
Later,
Greg